 |  |
|---|---|
 |  |
 |  |
 |  |
 |  |
 |
The Legend Refined ( and shortened ).
80mm Quick release system includes the receiver and one 80mm camera plate.
80mm Length is perfect for RED DSMC2 and other midsize cameras.
Additional Quick release plates available separately.
Weight: 0.90lb Receiver 0.23lb plate
A mini version of the legendary Touch n Go Quick release system.
40mm length Quick release plate includes the receiver and one 40mm camera plate.
40mm Length is perfect for all Mirrorless / DSLR cameras.
Additional Quick release plates available separately.
Weight: 0.75lb Receiver 0.12lb plate
TOUCH N GO
GDU 120MM TOUCH N GO
The Legendary Touch n Go Quick Release system Refined.
120mm industry standard length includes the receiver and one 120mm camera plate.
120mm Length is suitable for larger cinema camera setups.
Additional Quick release plates available separately.
Weight: 1.12lb Receiver, 0.38lb Plate
GDU 80MM TOUCH N GO
GDU 40MM TOUCH N GO
GDU 40MM
The heart of the GDU 40mm is a Canon 40mm F2.8 optical block stripped down to its core and then built back up with an armored precision machined mil spec 7075 Aluminum housing.
GDU ALUMINUM LENS CAP
GDU 24MM
The heart of the GDU 24mm is a Canon 24mm F2.8 optical block stripped down to its core and then built back up with an armored precision machined mil spec 7075 Aluminum housing.
 |  |
|---|---|
 |  |
 |  |
 |  |
GDU ALUMINUM CAP
Available in both PL and Canon Mount versions.
GDU UNIVERSAL MONITOR MOUNT (Compatible V-RAPTOR AND KOMODO and K-X)
The GDU Universal Monitor Mount Bolts directly to the top of RED V-Raptor and Komodo.
This mount also has a centered slot to allow mounting to 3rd party accessories.
This low profile, and pivoting mount solution is modular, allowing part locations to be swapped and moved. By rotating and reversing the parts the center point of the mount can slide 8.5" horizontal inches side to side.
This mount clamps onto a 15mm diameter rod which allows for vastly more clamping force than other mounts on the market, while at the same time providing quick and easy disassembly.
This rod is threaded and can be extended with other 15mm rods to provide more length.
The mount portion provides a single captured 1/4-20 screw for connecting to the base of monitors. There are x2, 1/4-20, and x2, M4 tapped holes for mounting other accessories from the top. All parts are machined from Aerospace grade Aluminum.
 |  |
|---|---|
 |  |
 |  |
 |  |
|---|---|
 |  |
 |  |
 |
KOMODO QUANTUM LWS FRONT 15mm
ROD ADAPTOR
Designed for the Komodo Quantum base plate, the GDU 15mm LWS FRONT ROD ADAPTOR mounts directly to the front of the Komodo Quantum base plate with two 1/4-20 screws. The adaptor has rod mounts at 60mm distance from horizontal lens center and is 85mm from vertical optical center of the RED Komodo camera. All rod mounts are locked in place by the newly designed GDU adjustable Micro Wing Nuts.
GDU CARTEL HANDLE ( GRIP ONLY )
Replaces stock RED rubber side handle grip on the DSMC2 Side Handle. -Does not include the RED DSMC2 Side Handle. That must be purchased separately here -Total Weight of Aluminum Handle : 8 ounces
Replaces stock RED rubber side handle grip on the DSMC2 Side Handle, or as a replacement to the GDU cowboy handle grip.
GDU COWBOY HANDLE
Machined 6061 Aluminum Anodized Black with Walnut carved Handle
-Works as single handle or together as a double handle. -Compatible with both DSMC2 and DSMC1 cameras
-Standard RED Rosette mounting for 360 degrees of rotation.
-Includes GDU Walnut Cartel Handle, Rosette mount and Camera mount.
 |  |
|---|---|
 |  |